Industrial Scrap Metal provides Scrap and metal recycling service for all type of metals in Los Angeles, CA to use them again.
Molybdenum is a Polyvalent Metallic Element that resembles chromium and tungsten in its properties; used to strengthen and harden steel.
Molybdenum solid scrap
Molybdenum plate scrap
Molybdenum skeleton
Molybdenum powder
Molybdenum dust
Molybdenum turnings
Molybdenum chips
Molybdenum filters
Pure molybdenum scrap
Alloy molybdenum scrap in any form
Nickel is a Hard Malleable Ductile Silvery Metallic element that is resistant to corrosion; used in alloys; occurs in pentlandite and smaltite and garnierite and millerite.
Inconel Scrap
Monel Scrap
Hastelloy Scrap
It is hard for Ferromagnetic Silver-White Bivalent or trivalent metallic element. Cobalt is a trace element in plant and animal nutrition. Cobalt, like iron, can be magnetized and so is used to make magnets. Other alloys of cobalt are used in jet turbines and gas turbine generators, where high-temperature strength is important.
Lead is a Bluish-White Lustrous Metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. It is one of the Most Recycled Materials in the world; lead is actually produced via recycling rather than through mining. Lead is a major constituent of the lead-acid battery used extensively in car batteries.
It is a soft bluish-white ductile malleable toxic bivalent metallic element; that occurs in association with zinc ores. It is found in sedimentary rocks at higher levels than in igneous or metamorphic rocks. About three-fourths of cadmium is used in Ni-Cd batteries, most of the remaining one-fourth is used mainly for pigments, coatings, and plating, and as stabilizers for plastics.
Tin is a chemical element with the symbol Sn and atomic number 50. Tin is a silvery metal that characteristically has a faint yellow hue. Tin, like indium, is soft enough to be cut without much force. The niobium-tin alloy is used for superconducting magnets, tin oxide is used for ceramics and in gas sensors (as it absorbs a gas its electrical conductivity increases and this can be monitored) Tin alloys are employed in many ways: as solder for joining pipes or electric circuits, pewter, bell metal, Babbit metal, and dental amalgams. The niobium-tin alloy is used for superconducting magnets, tin oxide is used for ceramics and in gas sensors (as it absorbs a gas its electrical conductivity increases and this can be monitored).
indium is the softest metal that is not considered to be an alkali metal. It is a silvery-white metal that resembles tin in appearance. It is a post-transition metal that makes up 0.21 parts per million of the Earth's crust. indium has a melting point higher than sodium and gallium, but lower than lithium and tin. indium is part of touch screens, flat-screen TVs, and solar panels.
Tantalum is a shiny, silvery metal that is soft when is pure. It is almost immune to chemical attack at temperatures below 150 C. Tantalum is virtually resistant to corrosion due to an oxide film on its surface. Tantalum finds use in four areas: high-temperature applications, such as aircraft engines; electrical devices, such as capacitors; surgical implants, and handling corrosive chemicals. It is rarely used as an alloying agent because it tends to make metals brittle.
Antimony is a semimetallic chemical element that can exist in two forms: the metallic form is bright, silvery, hard, and brittle the nonmetallic form is a grey powder. Antimony is a poor conductor of heat and electricity, it is stable in dry air and is not attacked by dilute acids or alkalis. Antimony and some of its alloys expand on cooling. Very pure antimony is used to make certain types of semiconductor devices, such as diodes and infrared detectors. Antimony is alloyed with lead to increase lead's durability. Antimony alloys are also used in batteries, low friction metals, type metal, and cable sheathing, among other products.
Bismuth is a white, crystalline, brittle metal with a pinkish tinge. Bismuth is the most diamagnetic of all metals, and the thermal conductivity is lower than any metal except mercury. Bismuth metal is used in the manufacture of low melting solders and fusible alloys as well as low toxicity bird shot and fishing sinkers.
Solid gallium is a blue-gray metal with orthorhombic crystalline structure; very pure gallium has a stunning silvery color. Gallium is solid at normal room temperatures, but as well as mercury, cesium, and rubidium it becomes liquid when heated slightly. Liquid gallium wets porcelain and glass surfaces; it forms a bright, highly reflective surface when coated on glass. It can be used to create brilliant mirrors. Gallium easily alloys with most metals, so it is used to form low-melting alloys.
Tellurium is a semimetallic, lustrous, crystalline, brittle, silver-white element. It is usually available as a dark grey powder, it has the properties both of metals and nonmetals. Tellurium is often used as an additive to steel and it is often alloyed with aluminum, copper, lead, or tin. Tellurium is added to lead to improve its durability, strength, and resistence to corrosion. It can be used for cast iron, ceramics, blasting caps, solar panels, and chalcogenide glasses.
ISM was fantastic. They gave me a very fair price for my old clunker of a car. In fact, they were so fair, I called them back to pick up my old washer and dryer. Great team!
“The guys at Industrial Scrap Metal were awesome. I got great prices and really fast service. They did an amazing demolition and left the place spotless. Will definitely use them in the future.”
“Industrial Scrap offers great service with all the equipment you would expect from professionals. As a construction contractor, I've used other companies looking for a deal, and I often found myself disappointed. I only use ISM now.”